|
|
|
|
 |
DriTac 6200 Flooring PS Adhesive-4gal
DriTac 6200 Premium Wood Flooring Adhesive is the product of choice for professional wood and cork flooring installations. After years of successful use, flooring contractors, installers, and architects continue to find DriTac 6200 Premium Wood Flooring Adhesive has the superior tack, excellent bond strength and long open time ideally suited to commercial, residential and institutional applications. APC recommends DriTac 6200 for most applications. Spread rate is approx. 120 sq. ft. per gallon but varies with subfloor conditions. NO RETURNS ON THIS ITEM.
VERY IMPORTANT: Make sure you test your floor for moisture before applying adhesive. Please Click Here to see how to check for moisture.
Recommended for APC Cork Glue Down Tiles Only. Jelinek Glue Down Tiles and Wall Tiles Please use DAP Water Based Contact Cement
Please visit http://www.dritac.com or contact them at (800) 394-9310 for additional questions
| $90.99 |
| |
 |
| |
|
|
|
|
|
|
6mm Cork Underlayment (100s/f)
6mm or 1/4" Thickness - 100 s/f Roll - 4 x 25 Linear Feet
With a variety of thicknesses, ranging from 3mm to 12mm, we offer plenty of options for rooms with high ceilings or to help control temperatures in your home. Density: 11.7-12.5 lbs/ft3. NO RETURNS ON THIS ITEM
| $110.00 |
| |
|
| |
|
|
|
|
|
|
BonaTech TRAFFIC 1gal
BonaTech Traffic brand wood floor finish is the latest generation of waterborne polyurethanes utilizing BonaTech technology. Traffic is a 2 part mixture that requires shaking before adding hardener and will last approximately 4 hours. If you need to mix more Traffic, you may stop at a board seam and then continue from there. Bona offers it own applicator which can be purchased at your local hardwood flooring store or you may use a Shur-Line applicator(synthetic sponge with 1/8"hairs on it). You may also use a sheepskin applicator but this will decrease your s/f coverage due to the absorption of the applicator. DO NOT USE A PAINT ROLLER. This will leave air bubbles on the surface. You do not need to screen between coats if you apply your second coat before 48 hours has elapsed. Typical coverage is 350-400 s/f per gallon. Drying time is 2-3 hours and percent cured is as follows: 24 hrs-75%, 72 hrs-90% and 100% cure is after 1 week. PLEASE READ ALL MANUFACTURERS INSTRUCTIONS BY CLICKING ON VIEW PRODUCT SPECS BUTTON. NO RETURNS ON THIS ITEM
| $113.39 |
| |
|
| |
|
|
|
|
|
|
3mm Cork Underlayment (200s/f)
3mm or 1/8" Thickness - 200 s/f Roll - 4x 50 Linear Feet
Cork underlayment is perfect for use under floating floors or hard woods to help with insulation and sound reduction. Underlayment contains 200 million air cells per cubic inch for superior noise and sound insulation. NO RETURNS ON THIS ITEM.
| $130.00 |
| |
|
| |
|
|
|
|
|
|
DriTac 7600 Urethane Adhesive-4gal
DriTac 7600 is a new & improved urethane wood adhesive which provides high initial tack, low odor and excellent permanent adhesion. It is V.O.C. compliant and is a trowel applied adhesive with excellent coverage. DriTac 7600 Urethane adhesive is a water-resistant adhesive which provides some vapor-retarding characteristics to wood flooring installations. Typically used for cork to cork applications. Spread rate is approx. 120 sq. ft. per gallon but varies with subfloor conditions. NO RETURNS ON THIS ITEM.
VERY IMPORTANT: Make sure you test your floor for moisture before applying adhesive. Please Click Here to see how to check for moisture.
Recommended for APC Cork Glue Down Tiles Only. Jelinek Glue Down Tiles and Wall Tiles Please use DAP Water Based Contact Cement
Please visit http://www.dritac.com or contact them at (800) 394-9310 for additional questions
| $133.24 |
| |
|
| |
|
|
|
|
